Serverinfo Dns Filter Move; Serverinfo Dns Filter Default - Fujitsu XG0224 User Manual

XG Series User's Guide

5.15.8.33 serverinfo dns filter move

Function
Available Model
Syntax
Options
Use Mode
Explanation

5.15.8.34 serverinfo dns filter default

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Change the priority of the application filter for the DNS server function.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
serverinfo dns filter move <count> <new_count>
<count>
• Target filtering definition number
Specify a filtering definition number of which the priority is to be changed.
<new_count>
• Destination filtering definition number
Specify a new priority for <count> with a decimal value from 0 to 29.
If any definition with the same definition number exists, it will be inserted before the
existing one.
Configuration mode (admin class)
Change the priority of the application filter for the DNS server function.
Set the default operation of the application filter for the DNS server function.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
serverinfo dns filter default <action>
<action>
Specify how to handle a packet that did not match any application filter table for the DNS
server function.
• accept
Transmit the relevant packet.
• reject
Block the relevant packet.
Configuration mode (admin class)
Set how to handle a packet that did not match any application filter table for the DNS
server function.
A packet that did not match any application filter table is transmitted.
serverinfo dns filter default accept
325
Chapter 5 Command Reference
Device Information Settings