I'm Here Commands; Iamhere - Fujitsu XG0224 User Manual

XG Series User's Guide

5.46 I'm here Commands

This section explains about "I'm here" commands.
5.46.1 I'm here Commands

5.46.1.1 iamhere

Function
Available Model
Syntax
Options
Use Mode
Explanation
Execution Example
Blink the READY LED and the CHECK LED alternately.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
iamhere <mode> [<time>]
<mode>
• on
Blink the READY LED and the CHECK LED alternately.
- [<time>]
Specify the LED blinking time (1s-86400s,1m-1440m,1h-24h,1d).
The unit shall be d (day), h (hour), m (minute), or s (second).
• off
Stop blinking.
Operation mode (admin class)
Configuration mode (admin class)
Blink the READY LED and the CHECK LED alternately. This allows visually locating a
switch quickly within a rack or series of racks.
During blinking, the following LEDs are turned off:
XG0440DC / XG0440DCR / XG2600
STATUS LED, ERROR LED, FLASH LED, FAN LED.
XG0224 / XG0448
ERROR LED, FLASH LED
# iamhere 0n 30m
553
Chapter 5 Command Reference
I'm here Commands