Acl Vlan - Fujitsu XG0224 User Manual

XG Series User's Guide
Use Mode
Explanation
Default

5.12.1.2 acl vlan

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
• Messages other than those above
Specify the target MAC address. Specify the source MAC address for ACL in the
xx:xx:xx:xx:xx:xx format, where "xx" is a 2-digit hexadecimal value.
<format> <value>
• llc
Specify it when targeting the LLC-format frame in which the value of <value> matches
LSAP. In <value>, specify a hexadecimal value from 0 to ffff.
To target all LLC-format frames, specify "any" in <value>.
• ether
Specify it when targeting the Ethernet-format frame in which the value of <value>
matches the type. In <value>, specify a hexadecimal value from 5dd to ffff.
To target all Ethernet-format frames, specify "any" in <value>.
• any
Specify it when targeting all frames. <value> is not necessary.
Configuration mode (admin class)
Specify the etherframe pattern in the ACL definition.
Any etherframe pattern can be specified in the ACL definition.
Set the definition of the ACL VLAN.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
acl <acl_count> vlan <vid> <cos>
<acl_count>
• ACL definition number
Specify an ACL definition serial number with a decimal value.
<vid>
Specify the source VID address for ACL.
• any
Specify when targeting all VID addresses.
• Other than those above
Specify the target VID. The allowable range of VID addresses for ACL is 1 to 4094.
<cos>
Specify COS for ACL.
• any
Specify it when targeting all COS.
• Other than those above
Specify the target COS. The allowable range of COS for ACL is 0 to 7.
Configuration mode (admin class)
Specify VLAN in the ACL definition.
Any VLAN ID can be specified in the ACL definition.
239
Chapter 5 Command Reference
ACL Information Settings