Commit - Fujitsu XG0224 User Manual

XG Series User's Guide

5.19.3.3 commit

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Reference
Message
Execution Example
Commit (or dynamically activate) the configuration.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
commit
N/A
Configuration mode (admin class)
Apply the configuration that was set or changed with the configuration command, without
device restart.
Changing the configuration may cause the communication interface to come down once
in order to apply address information in the device, resulting in a communication
interrupt.
"5.48 Effect by "commit" Command Execution", p.
<ERROR> Need to do reset after execute the save command.
Since unallowable configuration was added or changed, it cannot be applied.
Execute the "reset" command after the
<WARNING> The candidate-config is not changed.
No configuration is added or changed.
It is not necessary to execute the commit command.
# commit
#
560.
"save" command, and restart the device.
382
Configuration Display, Delete and Operation Commands
Chapter 5 Command Reference