Tail - Fujitsu XG0224 User Manual

XG Series User's Guide

5.17.5.2 tail

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Execution Example
Display the last part of command output.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
<command> | tail [<lines>]
<command>
Specify a command to execute.
<lines>
Specify the number of lines to be displayed with a decimal number from 1 to 1000.
The default is 10 lines.
Operation mode (user class/admin class)
Configuration mode (admin class)
Execute the specified command, and display the last output of the command by the
specified number of lines.
If the output of the specified command does not reach the specified number of lines, all
output will be displayed.
If the pager "5.17.2.1 terminal pager", p.
(the last output part of the specified command) of this command.
Enter a space character before and after a command pipe character ("|"). A command
pipe character can be specified only once, and the
once.
A sentence up to a new-line character is assumed to be one line. A statement that is too
long is divided into multiple lines on the screen, and the number of lines specified in the
argument may not match that of lines on the screen.
Specifying a command that requires a long time to execute, may result in a long wait time
until the command output.
This command acts for a "display" command such as the "show" command.
It displays all the command output for a control command such as the
# show logging syslog | tail 3
Dec 08 15:19:27 192.168.1.1 XG2600: mstpd: Topology Change detected
Dec 08 15:19:47 192.168.1.1 XG2600: sshd: generated public/private host key pair.
Dec 08 15:19:52 192.168.1.1 XG2600: logon: login admin on console
#
343, is enabled, the pager will act for the output
"tail"
358
Chapter 5 Command Reference
command can be specified only
"telnet" command.
Mode and Terminal Operation Commands