Port Mirroring - Fujitsu XG0224 User Manual

XG Series User's Guide
4.2

Port Mirroring

It is possible to monitor the traffic by mirroring the frames sent or received by a port to another port.
Multiple ports may not be mirrored to one port. However, multiple ports may be mirrored.
To configure port mirroring, carry out the following procedure in "admin" Operation mode.
• XG2600
XG2600# configure
XG2600(config)# ether 10 type mirror 0 1 rx
XG2600(config)# ether 11 type mirror 0 2 tx
XG2600(config)# commit
XG2600(config)# save
XG2600(config)# exit
• XG0224 / XG0448 / XG0440DC / XG0440DCR
XG0224# configure
XG0224(config)# ether 10 type mirror 0 1 both
XG0224(config)# ether 10 type mirror 10 2 tx
XG0224(config)# commit
XG0224(config)# save
XG0224(config)# exit
Command
Command
Chapter 4 Switch Functions and their Configuration
Switch to Configuration mode.
Configure the port 10 to be destination port and the receive
frames of the source port (port 1) are mirrored.
Configure the port 11 to be destination port and the send frames
of the source port (port 2) are mirrored.
Apply the configuration.
Save the configuration.
Switch to Operation mode.
Switch to Configuration mode.
Configure the port 10 to be destination port and the receive/send
frames of the source port (port 1) are mirrored.
Configure the port 10 to be destination port and the send frames
of the source port (port 2) are mirrored.
Apply the configuration.
Save the configuration.
Switch to Operation mode.
65
Task
Task

Port Mirroring