Filter Information; Vlan Macfilter - Fujitsu XG0224 User Manual

XG Series User's Guide
5.3.3

Filter Information

This section explains about the commands related to filter information.
5.3.3.1

vlan macfilter

Function
Available Model
Syntax
Options
Use Mode
Explanation
Set the MAC filter for VLAN.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
vlan <vid> macfilter <count> <action> <acl>
<vid>
• VLAN ID
Specify a VLAN ID with a decimal value.
<count>
• Priority
Set the filtering priority to be specified with a decimal value.
A smaller value has a higher priority.
The specified value is sorted and renumbered in sequence. If a filtering definition with
the same value already exists, the existing one will be changed.
Range
0 to 511 XG0224 / XG0448 / XG0440DC / XG0440DCR
0 to 63 XG2600
<action>
• pass
Transmit the packets that match the "acl mac", "acl vlan", "acl ip", "acl icmp", "acl tcp"
or "acl udp" definition of access control list.
• reject
Discard the packets that match the "acl mac", "acl vlan", "acl ip", "acl icmp", "acl tcp", or
"acl udp" definition of access control list.
<acl>
• ACL definition number
Specify the ACL definition number of the access control list where the packet pattern to
be filtered has been defined.
Configuration mode (admin class)
Set MAC filtering for each VLAN.
For the input packets that match the "acl mac", "acl vlan", "acl ip", "acl icmp", "acl tcp", or
"acl udp" definitions of the access control list which has been specified by <acl>, the filter
processing is executed in the way as specified by <action>.
166
Chapter 5 Command Reference
Model
VLAN Information Settings