Exit - Fujitsu XG0224 User Manual

XG Series User's Guide

5.17.1.3 exit

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Message
Execution Example
Return to the class, mode or configuration directory, or logout.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
exit
N/A
Operation mode (user class/admin class)
Configuration mode (admin class)
In the operation mode, the Use Mode class returns to the user class if it has been
switched from the user class to the admin class using the
logout occurs.
In the configuration mode, the current directory will be moved up to the next higher one
when the configuration directory function is enabled in a directory other than the top
directory. Otherwise, if the configuration has not been changed, the configuration mode
returns to the operation mode, but if the configuration has been changed, the
configuration mode still remains unreturned with an error message.
For the configuration directory function, refer to
The settings by the "terminal" and
<ERROR> The candidate-config has been changed but not committed.
The configuration is not reflected.
Reflect the configuration. When returning to the operation mode without reflecting the
configuration, use the "end"
(config)# exit
<ERROR> The candidate-config has been changed but not committed.
(config)# end
<WARNING> The candidate-config has been changed but not committed.
# exit
Login:
"5.17.1.4 configure", p.
"alias" commands will be discarded at logout.
or "quit" command.
338
Chapter 5 Command Reference
"admin" command. Otherwise
339.
Mode and Terminal Operation Commands