Snmp User Address - Fujitsu XG0224 User Manual

XG Series User's Guide

5.15.1.18 snmp user address

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set a SNMP host address.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
snmp user [<number>] address [<addr_number>] <address>
<number>
• User definition number
Specify a user definition number with a decimal value from 0 to 7.
The default is 0.
<addr_number>
• SNMP host definition number
Specify a SNMP host definition number with a decimal value from 0 to 7.
The default is 0.
<address>
• SNMP host address
Specify an IP address of the host, which permits SNMPv3 access, in the
XXX.XXX.XXX.XXX format, where "XXX" indicates a 3-digit decimal value.
The allowable range is as follows:
1.0.0.1 to 126.255.255.254
128.0.0.1 to 191.255.255.254
192.0.0.1 to 223.255.255.254
Configuration mode (admin class)
Set a SNMP host address under SNMPv3. Up to eight addresses can be defined for this
device, including ones set in the
It is assumed that no SNMP host address is set.
"snmp user notification"
276
Chapter 5 Command Reference
command.
Device Information Settings