Ethernet Common Information; Forwardingmode - Fujitsu XG0224 User Manual

XG Series User's Guide
5.1.1

Ethernet Common Information

This section explains about the commands related to ethernet common information.
5.1.1.1

forwardingmode

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
forwardingmode <mode>
XG2600
forwardingmode <mode>
<mode>
• store-and-forward
store and forward mode is used
• cut-through
cut through mode (default) is used
Configuration mode (admin class)
Set the switching mode of 10GbE ports.
• In cut-through mode, 65 byte and over error frames and 16129 byte and over frames
are forwarded. 64 byte and below frames are not forwarded.
It is forwarded as FCS error frame at the frame relay of 16129 or more.
• In store and forward mode, Error frames and 16129 byte and over frames are not
forwarded.
• Statistics for 10GbE ports is cleared when you change the switching mode.
It is assumed that cut through mode is used.
forwardingmode cut-through
90
Chapter 5 Command Reference
Port Information Settings