Connecting Multi-Room System Kit - Sherwood R-977 Operating Instructions Manual

Connecting Multi-room System Kit

You can control this receiver or other compatible components from another room with the remote control after
installing the Multi-room system kit.
1
Connect the IR IN jack to the output of the connecting block of the multi-room system kit to control this
receiver from Room 2 with the remote control.
2
To control other compatible component from another room with the universal remote control, connect the IR
OUT jack to the IR emitter.
IR
OUT IN
This receiver
ROOM 2
OUT
When this receiver is located inside a cabinet
In the cabinet
IR
OUT IN
This receiver
ROOM 2
OUT
Caution
• Remote operation may become unreliable if the IR receiver is exposed to strong light such as direct sunlight or inverted
fluorescent.
Main room
Connecting block
(Multi-room system kit)
output
DVD Player
IR emitter
(Multi-room system kit)
output
Connecting block
(Multi-room system kit)
IN
(COMPOSITE)
VIDEO
Room 2
IR receiver
(Multi-room system kit)
IN
(COMPOSITE)
VIDEO
TV/Projector
IR receiver
(Multi-room system kit)
TV/Projector
System Connections
25