Making Connections; Connecting Speakers; Placing Speakers - Sherwood RX-4508 Operating Instructions Manual

Making Connections

Connecting Speakers

Placing Speakers

Determine the locations for your speaker placement according to their manufacturer's directions
and the layout of your listening room.
Connecting Speakers
Carefully check the left (L) and right (R) channels and the polarities on the speakers being
connected to this receiver.
Connecting Speaker Wires
1
Strip away approx. 10 mm (3/8 inch) of
wire insulation, and then tightly twist the
wire ends.
2
Loosen the speaker terminal by turning it
counter-clockwise.
Left and right speakers
• Place the speakers with their front
surfaces as flush to the TV or monitor
screen as possible.
• Place each speaker so that sound is
aimed at where listener's ears would
be in the main listening position.
3
Insert the bare part of the wire.
4
Tighten the speaker terminal by turning it
clockwise.
9