Hdmi Assign; Component Assign; Digital Audio Assign; Video Mode - Sherwood R-977 Operating Instructions Manual

5
Move the cursor to "FINISH" by pressing the
CURSOR RIGHT() button, and then press the
ENTER button.
• The new name is stored in the memory.
TEST SETUP
DISC MENU HOME MENU
ENTER
DISPLAY RETURN
DISPLAY DIMMER
PURE MONITOR
AUDIO SELECT AUDIO SUBTITLE
SURROUND STEREO
Note
• To cancel the Re-Name operation, move the cursor to
"CANCEL" by pressing the CURSOR LEFT() button,
and then press the ENTER button.

HDMI Assign

 You should assign the connected HDMI INs if it is
different with the default settings. You can select
among HDMI 1 to 4 and FRONT. For details, see
"Connecting Video Components" on pages 14 ~ 17.
 You can select the desired HDMI IN from HDMI 1
~ HDMI 5, and F.HDMI.
Note
• In such a case that a HDMI IN is assigned to two input
sources or more and when these input sources are
selected, the uncompressed digital video signals (and
digital audio signals when the HDMI Audio Output
is set to "ON") input into the same HDMI IN can be
output from the HDMI MONITOR OUT of this receiver.

Component Assign

You should assign the connected COMPONENT

VIDEO INs if it is different with the default
settings. You can select desired COMPONENT
VIDEO IN from Component 1 ~ 2. For details, see
"Connecting Video Components" on pages 14 ~ 17.
Note
• In such a case that a COMPONENT VIDEO IN is
assigned to two input sources or more and when
these input sources are selected, the component video
signals can be viewed from the same COMPONENT
VIDEO IN.
TEST SETUP
DISC MENU HOME MENU
ENTER
DISPLAY RETURN
DISPLAY DIMMER
PURE MONITOR
AUDIO SELECT AUDIO SUBTITLE
SURROUND STEREO

Digital Audio Assign

You should assign the connected DIGITAL INs if

it is different with the default settings. You can
select the desired DIGITAL IN from Optical 1 ~ 2
and Coaxial 1 ~ 2. For details, see "Connecting
Audio Components" on pages 18 ~ 19.
Note
• In such a case that a DIGITAL IN is assigned to two
input sources or more and when these input sources
are selected, the digital audio signals can be heard from
the same DIGITAL IN.

Video Mode

Depending on the Video Mode settings, the video
input signal can be converted and output from the
HDMI MONITOR OUT.
Menu item
When there are multiple video
input signals, the video input
signals are detected and the
video input signal to be output
Auto from the HDMI MONITOR OUT
is selected automatically in the
priority order of them: "HDMI" >
"COMPONENT" > "(composite)
VIDEO"
The signal that is input into the
HDMI IN connector is always
HDMI played. The HDMI video input
signal is output from the HDMI
MONITOR OUT only.
The signals that are input into
the COMPONENT IN jacks are
always played. The component
Component
video signals are converted and
output from the HDMI MONITOR
OUT.
The signal that is input into the
(composite) VIDEO IN jack is
always played. The composite
Composite
video signal is converted and
output from the HDMI MONITOR
OUT.
Note
• "Component" video input cannot deliver 1080p signals.
OSD Menu Settings
Description
61