Osd Menu Settings; Using The Setup Menu - Sherwood R-977 Operating Instructions Manual

OSD Menu Settings

The setup menu displayed on the monitor TV allows you to
perform the setup procedures easily.
Overview
The OSD (On-screen Display) menu is a setting menu that is displayed on the monitor TV and allows you to
perform the setup procedure easily. In most situations, you will only need to set this once during the installation
and layout of your home theater, and it rarely needs to be changed later.

Using the setup menu

The OSD menu consists of 7 main menus; System Setup, Speaker/Room EQ Setup, Input Setup, HDMI Setup,
Sound Adjust, Video Adjust, and Multi Room. These menus are then divided up into various sub-menus.
1
Turn the menu screen on by pressing the SETUP button.
• The main menu is displayed on the screen.
•
To turn the setup menu off, press the button again.
SETUP
TEST
DISC MENU HOME MENU
ENTER
DISPLAY RETURN
DISPLAY DIMMER
PURE MONITOR
AUDIO SELECT AUDIO SUBTITLE
SURROUND STEREO
2
Select the desired menu by pressing the
CURSOR UP()/DOWN() buttons.
TEST
DISC MENU
DISPLAY
DISPLAY
PURE MONITOR
AUDIO SELECT
SURROUND
52
Main Menu
System Setup
EXIT
Speaker/Room EQ Setup
Input Setup
HDMI Setup
Sound Adjust
Video Adjust
Multi Room
SETUP
HOME MENU
ENTER
RETURN
DIMMER
AUDIO SUBTITLE
STEREO
NEXT
3
Confirm your selection by pressing the CURSOR
RIGHT() button.
• The setting value is marked with "OK".
• You can press the ENTER button instead of the
CURSOR RIGHT() button.
• To return to the previous menu, press the
CURSOR LEFT() button.
• To cancel the OSD menu operation, press the
SETUP button whenever you want.
TEST
DISC MENU
DISPLAY
DISPLAY
PURE MONITOR
AUDIO SELECT
SURROUND
SETUP
HOME MENU
ENTER
RETURN
DIMMER
AUDIO SUBTITLE
STEREO