Sherwood R-977 Operating Instructions Manual page 53

Main menu
AMP Assign
RS232 Control
System Setup
Momentary OSD
Save/Recall
Auto Setup
Room EQ
Speaker Config
Speaker/Room
EQ Setup
Speaker X-over
Speaker Distance
Channel Level
TUNER
NET/USB
BD/BDR
DVD/DVR
STB/CBL
Input Setup GAME
AUX
CD
PHONO
F.AUX
BT
Note
• The OSD menu and the momentary OSD can be displayed via the HDMI MONITOR OUT only. However, when the Video
Scaling is set to HDMI Bypass and the video signals are input into the HDMI IN, the momentary OSD cannot be displayed
via the HDMI MONITOR OUT. For details, see "Video Scaling" of "Input Setup" on page 62.
• When performing the OSD menu operation, the corresponding operation status is also displayed on the fluorescent
display. Therefore, in such a case that the OSD menu cannot be displayed on your TV, perform the setup procedure by
viewing the corresponding operation status on the fluorescent display. For details, see "Setup menu flow" on page 56.
Go to
Sub-menu
page
56
57
60
Main menu
HDMI Audio Output
CEC Control
HDMI Setup TV Power Sync.
Auto AV Sync
Monitor Output
Height Gain
Panorama
Center Width
Dimension
Sound Adjust
Dolby/DTS
Dolby TrueHD
Tone
Subwoofer Mode
PReP
Detail Enhancement
Edge Enhancement
Video Adjust
Mosquito NR
Test Patterns
OSD Transparency
Room2
Multi Room
Room3
OSD Menu Settings
Go to
Sub-menu
page
63
65
67
68
53