Updating The - Sherwood R-977 Operating Instructions Manual

Updating the R-977
Download and save the desired firmware from
Sherwood website before following the instructions
below.
1
Connect the unit to your LAN through a wireless or
wired connection.
Wireless LAN
PC
Wired LAN
LAN port/Ethernet
connector
PC
Router with access point
or
Router
To LAN port
To LAN port
2
According to the setting menu flow below, move
down the menu and make a note of the unit's IP
address.
Net Setup Network Connect
Other Network Standby
Name
Factory Reset
Network Information
3
Start your web browser, and then enter the IP
address you have just checked.
Appendix
Wired DHCP On / Off
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Proxy On / Off
Proxy Server
Proxy Port
Exit
Wireless AP List
WPS PIN
PBC
Cancel
Login sharing OK
Cancel
JBConnect Enter
Cancel
Exit
On / Off
R-977 / Default
Ok
Cancel
Name
DHCP
IP Address
MAC Address
Host Version
77