Network Connect - Sherwood R-977 Operating Instructions Manual

OSD Menu Settings
3
Select the desired item by pressing the CURSOR
UP()/DOWN() button, and then press the
CURSOR RIGHT() button.
• You can press the ENTER button instead of the
CURSOR RIGHT() button.
TEST SETUP
DISC MENU HOME MENU
ENTER
DISPLAY RETURN
DISPLAY DIMMER
PURE MONITOR
AUDIO SELECT AUDIO SUBTITLE
SURROUND STEREO
4
Adjust the setting values, and then press the
ENTER button to confirm your settings.
•
To return to the previous menu, press the
CURSOR LEFT() button.
•
To cancel the Network Setup menu operation,
press the SETUP button whenever you want.
TEST
DISC MENU
DISPLAY
DISPLAY
PURE MONITOR
AUDIO SELECT
SURROUND
70
TEST SETUP
DISC MENU HOME MENU
ENTER
DISPLAY RETURN
DISPLAY DIMMER
PURE MONITOR
AUDIO SELECT AUDIO SUBTITLE
SURROUND STEREO
SETUP
HOME MENU
ENTER
RETURN
DIMMER
AUDIO SUBTITLE
STEREO

Network Connect

You should set the network connect before using the
network function.
Network Setup
Connect
Wired
Wireless
 Wired: Use the network function through wired
connection
 Wireless: Use the network function through
wireless connection
Wired connection
Before you setup the connection, check that the LAN
cable is connected to the LAN/ETHERNET connector
properly and securely. For details, see "Connecting to
Network" on page 26.
Menu item
DHCP Set the DHCP function On/Off
Input IP Address when the DHCP
IP Address
function is Off
Input Subnet Mask when the
Subnet Mask
DHCP function is Off
Input Gateway when the DHCP
Gateway
function is Off
Input Primary DNS when the
Primary DNS
DHCP function is Off
Secondary Input Secondary DNS when the
DNS DHCP function is Off
Proxy Set the Proxy function On/Off
Input Proxy Server when the
Proxy Server
Proxy function is On
Input Proxy Port when the Proxy
Proxy Port
function is On
Exit Exit Wired Menu
Note
• When you set the DHCP to "ON", you do not need to
set the IP Address, Subnet Mask, Gateway, DNS, etc.
• When you set the DHCP to "OFF", you should set
the network connection manually by entering the
IP Address, etc. In this case, some knowledge of
networks is required. If you do not understand about
Internet connection, contact your Internet Service
Provider.
Description