Subwoofer Mode
Sobwoofer Plus+ mode is valid only when
"Front" and "Center" are set to "Full Range"
and "Subwoofer" is set to "Yes" on the Speaker/
Room EQ Setup menu. For details, see "Setting the
Speaker/EQ setup" on page 57.
Menu item
When the low frequency signals
of channels set to "Full Range"
are reproduced from those
channels only. In this mode, the
low frequency signals that are
reproduced from the subwoofer
Normal
channel is only the low frequency
signals of LFE (from the multi-
channel sources that contains LFE
(Low Frequency Effects) channel,
also called the ".1" channel) and
the channels set to the setting
value other than "Full Range".
When the low frequency signals
of channels set to "Full Range"
are reproduced simultaneously
from those channels and the
subwoofer channel. In this mode,
Subwoofer
the low frequency range expands
Plus+
more uniformly through the room,
but depending on the size and
shape of the room, interference
may result in a decrease of
the actual volume of the low
frequency range.
Description
Setting the Video Adjust
Main Menu Video Adjust
PReP
BACK
Detail Enhancement
Edge Enhancement
Mosquito NR
Test Patterns
OSD Transparency
PReP: Improve the progressive video signal by
progressive reprocessing
Detail Enhancement: Enhance the entire picture by
making details stand out
Edge Enhancement: Enhance the picture by
sharpening object edges
Mosquito NR: Remove the mosquito noise
Test patterns: Select the desired test pattern
OSD Transparency: Adjust the transparency of
OSD background
PReP
The PReP has an effect on the 480p/576p or the
1080p video signals only.
Menu item
Improve the progressive video
Auto
signal automatically
Turn off the progressive
Off
reprocessing
Detail Enhancement
The detail enhancement can be adjusted within
the range of -10 ~ +10.
Edge Enhancement
The edge enhancement can be adjusted within the
range of -10 ~ +10.
OSD Menu Settings
NEXT
Description
67