Setting The Multi Room - Sherwood RD-7505 Operating Instructions Manual

Hide thumbs Also See for RD-7505:
Table of Contents

Advertisement

RD-7505(A)_ENG_101115_RD-7505(A)_ENG 2010-11-16 오전 10:36 페이지 50

SETTING THE MULTI ROOM

• The ROOM 2 function allows enjoying one source in the main room and playing another in a different room at the
same time.
MLT ROOM
• ROOM 2(ROOM 2 MODE) : To turn on or off the ROOM 2 function.
• IN(ROOM 2 INPUT) : To select the desired ROOM 2 source.
• VOL(ROOM 2 VOLUME) : To adjust the volume on the power amplifier assigned to "ROOM 2".
• RETURN : To return to the previous menu.
■Notes:
• When the speakers are connected to the ROOM 2 speaker terminals, be sure to set the "AMP" to "ROOM 2". (For details, refer
to "When selecting the AMP ASSIGN" on page 38.)
• Only the analog input signal from the ROOM 2 source can be heard. So, be sure to make analog audio connection (and select
analog input for ROOM 2 source if needed).
1.
Press the CURSOR
to set the ROOM 2 MODE as desired.
ON : To turn on the ROOM 2 function.("R2" lights up)
OFF : To turn it off.("R2" goes off)
■Notes:
• When the ROOM 2 mode is set to OFF, you cannot select
the ROOM 2 INPUT and the ROOM 2 VOLUME.
• Even when this receiver enters the standby mode, in such
a case that "R2" lights up still, meaning only the ROOM 2
circuitry operates, the ROOM 2 source can be played
independently.
• When you do not use the ROOM 2 function, turn off the
ROOM 2 function to save electricity.
■When the ROOM 2 MODE is set to ON.
2.
Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the desired item.
All manuals and user guides at all-guides.com
ROOM 2 : OFF / ON
RETURN
IN : MAIN / TUNER / CD / AUX / F.AUX / VIDEO 1 / V2/IPOD / VIDEO 3 / BT
VOL : 30 / MIN(0) ~ MAX(80)
RETURN
buttons
LEFT(◀)/RIGHT(▶)
3.
Press the
CURSOR LEFT(◀)/RIGHT(▶)
to set the selected item as desired.
■When selecting the ROOM 2 INPUT
• You can select the desired among MAIN source, TUNER,
CD, AUX, F.AUX, VIDEO 1, V2/IPOD, VIDEO 3 and BT.
■When selecting the ROOM 2 VOLUME
• You can adjust the volume on the power amplifier
assigned to "ROOM 2" when the ROOM 2 speaker
terminals are connected to the speakers in a different
room.
50
buttons

Advertisement

Table of Contents
loading

Table of Contents