Table of Contents
Advertisement
Installing and Setting up the Machine > Command Center RX
Registering Destinations
You can register destinations to the machine's Address Book, from Command Center RX.
1
Display the screen.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Print the status page to check the machine's IP address and the host name. Press the
Menu/Counter] key, [Report], [Report Print], [Status Page], and then press [Yes].
Report
3
Log in with administrator privileges.
The factory default setting for the default user with administrator privileges is shown below.
* Upper case and lower case letters are distinguished (case sensitive).
4
From the
[Address
Book] menu, click
5
Click [Add].
Report Print
Login User Name
Login Password
[Machine Address
3
1
2
2-48
Status Page
Admin
Admin
Book].
[System
Advertisement
Table of Contents
Troubleshooting
