Table of Contents
Advertisement
Using Various Functions > Functions
Combine
Copy
Combines 2 or 4 original sheets into 1 printed page. You can select the page layout and the type of boundary lines
around the pages.
The following types of the boundary lines are available.
None
Select [2 in 1] or [4 in 1], and select the page layout from "Layout".
Item
Off
2 in 1
2 in 1 Layout
Border Line
Orig. Orientation
4 in 1
4 in 1 Layout
Border Line
Orig. Orientation
Solid Line
Value
―
Disables the function.
―
Press the [OK] key to copy the original with the default setting. For the default
settings, refer to
L to R T to B,
Press [Detail] to display the [2 in 1 Layout] screen.
R to L
Select the page layout of scanned originals, and press the [OK] key.
None, Solid Line,
Select the page boundary line, and press the [OK] key.
Dotted Line,
Positioning Mark
Top Edge on Top,
Select the orientation of the original document top edge to scan correct direction.
Top Edge on Left
Choose orientation of the originals, either [Top Edge on Top] or [Top Edge on
Left]. Then press the [OK] key.
―
Press the [OK] key to copy the original with the default setting. For the default
settings, refer to
Right then Down,
Press [Detail] to display the [4 in 1 Layout] screen.
Down then Right,
Select the page layout of scanned originals, and press the [OK] key.
Left then Down,
Down then Left
None, Solid Line,
Select the page boundary line, and press the [OK] key.
Dotted Line,
Positioning Mark
Top Edge on Top,
Select the orientation of the original document top edge to scan correct direction.
Top Edge on Left
Choose orientation of the originals, either [Top Edge on Top] or [Top Edge on
Left]. Then press the [OK] key.
Dotted Line
Description
Function Default on page
Function Default on page
6-15
Positioning Mark
8-27.
8-27.
Advertisement
Table of Contents
Troubleshooting
