Installing and Setting up the Machine > Command Center RX
Changing Security Settings
This section explains how to change the security settings.
1
Display the screen.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Print the status page to check the machine's IP address and the host name. Press the
Menu/Counter] key, [Report], [Report Print], [Status Page], and then press [Yes].
Report
3
Log in with administrator privileges.
The factory default setting for the default user with administrator privileges is shown below.
* Upper case and lower case letters are distinguished (case sensitive).
4
Click
[Security
Settings].
Report Print
Status Page
Login User Name
Login Password
2-40
[System
Admin
Admin