Kyocera ECOSYS M3040dn Operation Manual page 263

Setup and Registration (System Menu) > System Menu
Item
Wireless Custom Setup
Network
Netwk Name (SSID)
Connection Mode
Channel
Netwk Authentic.
Encryption
*1 Not displayed if you selected [Ad Hoc] for "Connection Mode".
*2 Not displayed if you selected [WPA2-PSK] for "Netwk Authentic.".
*3 Displayed if you selected [WPA-PSK] or [WPA2-PSK] for "Netwk Authentic.".
The detailed settings for wireless LAN can be changed. Set the items below then
press [Connect] to start the connection.
Set the SSID (Service Set Identifier) of the wireless LAN to which the machine
connects.
Up to 32 characters can be entered. Refer to the
page 11-11
Set the connection mode.
Value
Ad Hoc: Directly communicates with the device without going through an
access point. This method cannot be used to connect to two or more
devices.
Infrastructure: Performs communication through an access point.
Set channel.
Use the [▲] or [▼] key or the numeric keys to enter a number.
The Channel can be set between 1 and 11.
Select network authentication type.
To select other options, open the device home page from a computer.
Value: Open, Shared, WPA-PSK
Select encryption settings. The setting values vary depending on the "Netwk
Authentic." setting.
Data Encryption Set the encryption method.
Value
When "Netwk Authentic." is set to [Open] or [Shared]:
Disable, WEP
When "Netwk Authentic." is set to [WPA-PSK] or [WPA2-PSK]:
TKIP
WEP Key Register the WEP key. Press [Edit] and Enter the WEP Key using the numeric
keys.
Up to 26 characters can be entered. Refer to the
page 11-11
*3
Preshared Key Register the Preshared Key. Press [Edit] and Enter the Preshared Key using the
numeric keys.
The number of characters is between 8 and 64. Refer to the
Method on page 11-11
NOTE
for details on entering characters.
NOTE
*2 *2
, AES, Auto
NOTE
for details on entering characters.
NOTE
for details on entering characters.
8-14
Description
Character Entry Method on
*1 *1
, WPA2-PSK
Character Entry Method on
Character Entry