Installing and Setting up the Machine > Installing Software
Setting TWAIN Driver
Register this machine to the TWAIN Driver. Instructions are based on interface elements as they appear in Windows 7.
1
2
3
Display the screen.
1
Select [Start] button on the Windows,
Setting]. TWAIN Driver screen appears.
NOTE
In Windows 8, click [Search] in charms, and enter "TWAIN Driver Setting" in the search
box. Select
[TWAIN Driver
2
Click [Add].
Configure TWAIN Driver.
(Network)
1
4
2
3
5
NOTE
When the machine's IP address or host name is unknown, contact Administrator.
Finish registering.
NOTE
Click [Delete] to delete the added machine. Click [Edit] to change names.
[All
Programs], [Kyocera] and then
Setting] in the search list.
Enter the machine name.
Set units of measurement.
Select this machine from the
list.
Enter the machine's IP
address or host name.
Set the Compression Level.
When using SSL, select the
checkbox beside SSL.
2-32
[TWAIN Driver
(USB)
3
1
2
4