Table of Contents
Advertisement
Preparation before Use > Registering Destinations in the Address Book
The Folder (SMB) Address
1
Press the [◄] or [►] key to select [Folder (SMB)], and press [Edit].
Detail:
Folder(SMB):
Edit
2
Set "Host Name (SMB)", "Path", "Login User Name" and "Login Password". Enter the
information for each item and press the [OK] key.
The table below explains the items to be entered.
NOTE
For the computer name, share name, domain name, and user name, enter the
information that you noted when you created the shared folder. For details on creating
shared folders, refer to
on page
3-20.
Item
*1
Host Name (SMB)
Path
Login User Name
Login Password
*1 To specify a port number different from the default (445), enter using the format
"Host name: port number" (Example: SMBhostname:140).
To enter the IPv6 address, enclose the address in brackets [ ].
(Example: [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
NOTE
Refer to the
Character Entry Method on page 11-11
3
The connection confirmation screen appears. Press [Yes] to check the connection and [No]
to not check it.
"Connected." appears when connection to the destination is correctly established. If "Cannot
connect." appears, review the entry.
4/ 6
2
Preparation for Sending a Document to a Shared Folder in a PC
Description
Computer name
Share name
For example: scannerdata
If saving in a folder in the shared folder:
share name\folder name in shared folder
If the computer name and domain name are the
same: User Name
For example: james.smith
If the computer name and domain name are
different: Domain name\User name
For example: abcdnet\james.smith
Windows logon password
(Case sensitive.)
3-32
1
Max. No. of
Characters
Up to
64 characters
Up to
128 characters
Up to
64 characters
Up to
64 characters
for details on entering characters.
Advertisement
Table of Contents
Troubleshooting
