Table of Contents
Advertisement
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
ID Card Settings
If ID card authentication is enabled, select the authentication type.
NOTE
This functions appears when the Card Authentication Kit is activated.
Card Authentication Kit(B) "Card Authentication Kit" on page 11-3
This function does not appear when the user logs in as a network authentication user.
1
2
Display the screen.
1
Press the
[System
Menu/Counter] key.
2
Press the [▲] or [▼] key to select [User/Job Account], and press the [OK] key.
Sys. Menu/Count.:
02
Counter
System/Network
03
User/Job Account
04
Exit
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and press [Login].
The factory default login user name and login password are set as shown below.
Login User Name
4000
3
Press the [▲] or [▼] key to select [User Login Set.], and press the [OK] key.
Configure the settings.
Press the [▲] or [▼] key to select [ID Card Settings], and press the [OK] key.
The following settings can be selected.
Item
Key Login
Password Login
4000
When ID card authentication is enabled, select whether or not login by
keyboard is allowed.
Value: Permit, Prohibit
Select whether or not to require password entry after authenticating by ID
card.
Value: Off, On
9-20
Login Password
Descriptions
Advertisement
Table of Contents
Troubleshooting
