Loading Paper In The Multi Purpose Tray - Kyocera ECOSYS M3040dn Operation Manual

Preparation before Use > Loading Paper

Loading Paper in the Multi Purpose Tray

The multi purpose tray will hold up to 100 sheets of plain paper (80 g/m
For details of the supported paper sizes, refer to
setting, refer to Media Type Set. (Media Type Settings) on page
print on any special paper.
IMPORTANT
If you are using a paper weight of 106 g/m
paper you are using.
The capacity of the multi purpose tray is as follows.
2
• Plain paper (80 g/m
• Thick paper (106 to 220 g/m
• Hagaki: 1 sheet
• Envelope DL, Envelope C5, Envelope #10 (Commercial #10), Envelope #9 (Commercial #9),
Envelope #6 (Commercial #6), Envelope Monarch, Youkei 4, Youkei 2: 5 sheets
• OHP film: 1 sheet
NOTE
When you load custom size paper, enter the paper size by referring to
Multi Purpose Tray (MP Tray Setting) on page
When you use special paper such as transparencies or thick paper, select the media type by referring to
Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) on page
1
2
2
or more, set the media type to Thick and set the weight of the
), recycled paper or color paper: 100 sheets
2
): 5 sheets
3-17.
Open the multi purpose tray.
Pull out the support tray section of the MP tray.
2
).
Choosing the Appropriate Paper on page
8-23. Be sure to use the multi purpose tray when you
Specifying Paper Size and Media Type for the
3-11
11-17. For the paper type
Specifying
3-17.