Setting User Login Administration; Adding A User (Local User List) - Kyocera ECOSYS M3040dn Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Setting User Login Administration

This registers, alters and deletes users and configures the settings for User Login Administration.

Adding a User (Local User List)

This adds a new user. You can add up to 100 users (including the default login user name).
NOTE
By default, one of each default user with machine administrator rights and administrator privileges is already stored.
Each user's properties are:
Machine Administrator
User Name: DeviceAdmin
Login User Name: 4000
Login Password: 4000
Access Level: Machine Administrator
Administrator
User Name: Admin
Login User Name: Admin
Login Password: Admin
Access Level: Administrator
* Upper case and lower case letters are distinguished (case sensitive).
It is recommended to periodically change the user name, login user name and login password regularly for your
security.
1
Display the screen.
1
Press the [System Menu/Counter] key.
2
Press the [▲] or [▼] key to select [User/Job Account], and press the [OK] key.
Sys. Menu/Count.:
Counter
02
System/Network
03
04 User/Job Account
Exit
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and press [Login].
The factory default login user name and login password are set as shown below.
Login User Name
4000 4000
9-5
Login Password