Kyocera ECOSYS M3040dn Operation Manual page 346

Troubleshooting > Troubleshooting
S
Message
Scanner memory is full.
Job is canceled.
*1
Send Error.
SSD error. Job is canceled.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details on
Auto Error Clear, refer to
T
Message
The slit glass requires
cleaning.
The waste toner box is full.
The waste toner box is
improperly installed.
This user account is locked
out.
Contact administrator
Job is canceled.
Toner is low.
(Replace when empty.)
Checkpoints
—
*1
—
—
Auto Err. Clear on page
Checkpoints
—
Is the waste toner box full?
—
—
—
Corrective Actions
Scanning cannot be performed any
more due to insufficient memory of
scanner. The job is canceled. Press
the [OK] key.
An error has occurred during
transmission. The job is canceled.
Press the [OK] key.
Refer to Responding to Send Error
for the error code and corrective
actions.
An error has occurred on SSD. Job
is canceled. Press [End].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Turn the power OFF/ON. If the error
still occurs, divide the file into
smaller files. If the error occurs after
the file is divided, the specified file
may be damaged. Delete the file.
04: Insufficient space on SSD to
complete this operation. Move data
or delete unneeded data.
8-27.
Corrective Actions
Clean the slit glass using the dry
cloth.
Replace the waste toner box.
The waste toner box is not installed
correctly. Set it correctly.
Contact administrator.
The job is canceled. Press the [OK]
key.
It is almost time to replace the toner
container. Obtain a new toner
container.
10-21
Reference
Page
—
page 10-23
—
Reference
Page
page 10-2
page 10-8
page 10-8
―
―