User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
ID Card Settings
If ID card authentication is enabled, select the authentication type.
NOTE
This functions appears when the Card Authentication kit is activated.
Optional Applications (page 11-7)
This function does not appear when the user logs in as a network authentication user.
1
2
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Model Name
7056i
8056i
2
"User Login Setting" [Next] > "ID Card Settings" [Next]
Configure the settings.
The following settings can be selected.
Item
Keyboard Login
Additional
*1
Authentication
*1 This function does not appear when the server type is set to [NTLM] or [Kerberos] in
"Network Authentication".
Login User Name
7000
8000
When ID card authentication is enabled, select whether or not
login by keyboard is allowed.
Value: Permit, Prohibit
Select whether or not to require password entry after
authenticating by ID card.
Value: Off, Use Password, Use PIN
9-30
Login Password
7000
8000
Descriptions