Table of Contents
Advertisement
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
ID Card Settings
If ID card authentication is enabled, select the authentication type.
NOTE
This functions appears when the Card Authentication kit is activated.
Card Authentication Kit(B) "Card Authentication Kit" (page 11-3)
1
2
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name:
Login Password:
2
[User Login Setting] > [ID Card Settings]
Configure the settings.
The following settings can be selected.
Item
Keyboard Login
Additional
*1
Authentication
*1 This function does not appear when the server type is set to [NTLM] or [Kerberos] in "Network
Authentication".
3500
3500
When ID card authentication is enabled, select whether or not login by
keyboard is allowed.
Value: Permit, Prohibit
Select whether or not to require password entry after authenticating by ID
card.
Value: Off, Use Password
9-29
Descriptions
Advertisement
Table of Contents
Troubleshooting
