MAINTENANCE WORK ON CHASSIS AND ENGINE
Adjusting the headlight range
9.62
Removing the air filter
x
9.63
–
Check the headlamp setting. (
–
Use a screwdriver (see illustration) to adjust the headlight range.
Specification
The boundary between light and dark must be exactly on the lower mark for a motor-
cycle with a rider (mark is applied under: Checking headlight adjustment).
Info
Turn clockwise to increase the light range, turn counterclockwise to reduce the
light range.
If you have a payload, you may have to correct the headlight range.
600613-01
–
Remove the seat. (
–
Remove screws
100285-10
P. 118)
P. 102)
. Remove filter box top
.
119