KTM 690 ENDURO EU Owner's Manual page 114

MAINTENANCE WORK ON CHASSIS AND ENGINE
–
Pull the Map‑Select switch and holder
–
Pull the Map‑Select switch out of the holder.
100237-10
–
Turn the adjusting wheel until the desired digit is next to marking
Set the Map‑Select switch to Soft.
–
Set the adjusting wheel to position 1.
Soft – reduced homologated peak performance for better driveability.
Set the Map‑Select switch to Advanced.
–
Set the adjusting wheel to position 2.
Advanced – homologated performance with extremely direct responsiveness.
Set the Map‑Select switch to Standard.
–
Set the adjusting wheel to position 3, 4, 5, 6, 7, 8 or 9.
100238-10
Standard – homologated performance with balanced responsiveness.
Set the Map‑Select switch to poor fuel quality.
–
Set the adjusting wheel to position 0.
Poor fuel quality – homologated performance is reduced in accordance with the
fuel quality, use for no more than 1 tank of fuel
–
Position the Map‑Select switch in the holder.
–
Slide the Map‑Select switch with the holder downward onto the retaining bracket.
–
Mount the seat. (
upward off of the retaining bracket.

P. 103)
112
.
