Combination Instrument - Setting/Resetting Trip 2 Display - KTM 690 ENDURO EU Owner's Manual

OPERATING ELEMENTS
Combination instrument - setting/resetting TRIP 2 display
5.24
Info
The tripmaster TRIP 2 operates constantly and counts up to 999.9.
You can use the tripmaster to measure trips or the distance between refuelling stops. After reaching 999.9, the tripmaster begins
again at 0.0.
–
Switch on the ignition by turning the ignition key in the position .
–
Press the MODE button several times until the TRIP 1 display mode is active.
–
Keep the SET button pressed.
The TRIP 1 display is at 0.0.
700121-01
–
Switch on the ignition by turning the ignition key in the position .
–
Press the MODE button several times until the TRIP 2 display mode is active.
–
Keep the SET button pressed.
The TRIP 2 display is at 0.0.
700122-01
31