KTM 690 ENDURO EU Owner's Manual page 140

MAINTENANCE WORK ON CHASSIS AND ENGINE
–
Remove the plug
100205-10
–
Remove the plug
–
Drain the remaining engine oil.
–
Thoroughly clean parts and sealing area.
–
Check parts for damage and wear. Replace damaged or worn parts.
100206-10
–
Position oil screen
–
Refit plug

Specification
Plug, oil screen
100207-10
with the oil screen
 
with the oil screen
 
with O-rings.

with O-ring and tighten it.
and O-rings.
and O-rings.
M20x1,5 15 Nm (11.1 lbf ft)
138