Checking Engine Oil Level; Changing Engine Oil And Oil Filter, Cleaning Oil Screens - KTM 690 ENDURO EU Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Checking engine oil level

9.76
Info
The engine oil level must be checked when the engine is at operating temperature.
Changing engine oil and oil filter, cleaning oil screens
9.77
–
Drain the engine oil. x (
–
Remove the oil filter.
x
–
Clean oil screens. x (
–
Mount the oil filter. x (
–
Fill up with engine oil. x
–
Stand the motorcycle upright on a horizontal surface.
Condition
The engine is at operating temperature.
–
Check the engine oil level.
The engine oil must be between the lower and upper edge of the oil level viewer.
»
100210-10
P. 134)
( P. 135)
P. 137)
P. 137)
( P. 139)
Info
After switching off the engine, wait for one minute and then check.
If the engine oil level is not at the specified level:
–
Top up the engine oil. (
x
P. 140)
133