Removing Rear Wheel - KTM 690 ENDURO EU Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE
Removing rear wheel
x
9.42
–
Fully tighten screw
Specification
Screw, fork stub
–
Jack up the motorcycle. (
–
Press the brake caliper by hand on to the brake disc in order to press back the brake
piston.
–
Remove nut
–
Holding the rear wheel, withdraw the wheel spindle
100267-10
–
Push the rear wheel forwards as far as possible and take the chain off the rear sprocket.
Warning
Danger of accidents Reduced braking due to damaged brake discs.
–
Always lay the wheel down in such a way that the brake disc is not damaged.
–
Take the rear wheel out of the swing arm.
Info
Do not operate the foot brake when the rear wheel is removed.
100268-01
.

P. 56)
. Remove chain adjuster
 
M8 15 Nm (11.1 lbf ft)
.
.

95