MAINTENANCE WORK ON CHASSIS AND ENGINE
Removing front wheel
x
9.40
–
Insert the brake pads, insert the bolt and mount the split pin.
–
Operate the foot brake lever repeatedly until the brake linings lie on the brake disc and
there is a tight spot.
–
Adjust the brake fluid level to the MAX mark.
Brake fluid DOT 4 / DOT 5.1 (
–
Refit screw with membrane.
Info
100289-01
Clean up overflowed or spilt brake fluid immediately with water.
–
Jack up the motorcycle. (
–
Press the brake caliper by hand on to the brake disc in order to press back the brake
pistons.
100261-01
P. 166)
P. 56)
92