MAINTENANCE WORK ON CHASSIS AND ENGINE
Loosening the fork protection
9.12
Positioning the fork protection
9.13
–
Remove excess oil.
–
Position the fork protection. (
–
Remove the motorcycle from the work stand. (
–
Remove screws
–
Remove screws
–
Remove the screws on the right fork leg. Push the fork protection downwards.
100292-10
–
Position the fork protection on the left fork leg. Mount and tighten screws
Specification
Remaining screws, chassis
–
Position the brake line and cable harness. Put the clamp on, mount and tighten
screws
.
–
Position the fork protection on the right fork leg. Mount and tighten screws.
Specification
Remaining screws, chassis
100292-11
P. 64)
and take off clamp.
on left fork leg. Push the fork protection downwards.
P. 56)
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
64
.