Cooling System - KTM 690 ENDURO EU Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Cooling system

9.65
–
Mount and tighten screws
Specification
Remaining screws, chassis
–
Mount the seat. (
100285-11
The water pump
The pressure resulting from the warming of the cooling system is regulated by a valve in
the radiator cap
tank . If the temperature falls, the excess coolant is sucked back into the cooling system.

The specified coolant temperature is therefore permissible without danger of function prob-
lems.
125 °C (257 °F)
600614-10
.

P. 103)
in the engine forces the coolant to flow.

. Heat expansion causes excess coolant to flow into the compensating

M6 10 Nm (7.4 lbf ft)
121