Filling Up With Engine Oil - KTM 690 ENDURO EU Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE
Filling up with engine oil
9.82
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
–
Position oil screen
–
Refit plug
Specification
Plug, oil screen
100208-10
x
–
Remove filler plug with O-ring
Engine oil
–
Refit plug with O-ring
Danger
Danger of poisoning Exhaust gases are poisonous and can result in
unconsciousness and/or death.
–
100209-10
–
Start the engine and check that it is oil-tight.
–
Install the engine guard. (
–
Check the engine oil level. (
with O-rings.

with O-ring and tighten it.

from the clutch cover and add engine oil.

1.70 l (1.8 qt.)
and tighten it.

When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in a closed space.
P. 132)
P. 133)
M20x1,5 15 Nm (11.1 lbf ft)
Engine oil (SAE 10W/60) (
139
P. 167)