Using The Document Feeder - Konica Minolta bizhub 180 User Manual

6

Using the Document feeder

1
Load the documents in the Document
feeder.
For details refer to "Loading the
Document" on page 3-9.
2
Press the [Copy] key.
The "2in1" (or "4in1") indicator lights
up.
3
Specify the desired copy settings.
For details, refer to "To make a simple copy" on page 3-2.
? Do you know the copy order for the 4in1 copy function?
➜ The copy order can be set to one
of the two shown at the right. For
details, refer to "To set the "4IN1
COPY ORDER" function" on
page 7-52.
The default setting is PATTERN1.
4
Using the 10-key pad, enter the number of copies to be made.
5
Press the [Start] key.
This will start the copy cycle.
6-4
6.1 Single-Sided Copies
PATTERN1 PATTERN2
1 2 1 3
3 4 2 4
bizhub 180