Konica Minolta bizhub 180 User Manual page 40

2.5 Part Names and Their Functions
No. Part Name
1 Copy tray
2 Front cover
3 1st tray
4 Manual bypass
5 Lock release lever
6 Side cover
7 Mechanical counter
8 Power switch
9 Parallel interface connector
10 RJ45 Connector for
networking
11 Printer USB connector
12 Document scales
13 Original cover (optional)
14 Original glass
15 Control panel
bizhub 180
Description
Collects copies and printouts fed out facing down.
Opened when replacing the toner bottle. (p. 8-2)
• Holds up to 250 sheets of paper.
• The paper size can be adjusted freely.
• Can be loaded with special paper. (p. 7-17)
• Used for manual feeding of paper.
• The paper is fed one sheet at a time.
• Can be loaded with special paper. (p. 5-8)
Used to open and close the Side cover.
Opened when clearing paper misfeeds.
Indicates the number of copy and printout pages that were
printed.
Used to turn the machine on and off. (p. 2-22)
Used for connecting a parallel cable from the computer.
Used for connecting the network cable when this machine is
used for Internet faxing, network printing and network scanning.
Used for connecting a USB cable from the computer.
Used to align the document. (p. 3-11)
Presses down on the document positioned on the Original
glass.
When manually feeding a document, position it on the Original
glass so that it can be scanned.
Position the document face down on the glass. (p. 3-11)
Used to start copying or to make various settings. (p. 2-17)
2
2-11