Konica Minolta bizhub 180 User Manual page 48

2.6 Names of Control Panel Parts and Their Functions
No. Part Name
21 [Scan] key
22 [Fax] key
23 [Copy] key
24 [Access] key
25 [Energy Saver] key
26 [Interrupt] key
27 [123/ABC] key
28 [Panel Reset] key
29 [Stop] key
30 [Start] key
31 10-Key Pad
bizhub 180
21 22 23
31 30 29 28
Function
Press to enter Scan mode. The indicator lights up in green to
indicate that the machine is in Scan mode.
(Available only when the Network interface card NC-502, Fax kit
FK-505 and the Scanner unit SU-502 are installed.)
Does not function on this machine.
Press to enter Copy mode. The indicator lights up in green to
indicate that the machine is in Copy mode.
Used with user management. (p. 6-24)
Press to enter Energy Save mode. (p. 2-23)
Press to enter Interrupt mode. The indicator lights up in green
to indicate that the machine is in Interrupt mode.
Press again to cancel Interrupt mode and return to the mode
before Interrupt mode was entered. (p. 5-38)
Does not function on this machine.
• Cancels all copy functions and returns them to their default
settings.
• Deletes all queued jobs.
Stops the multi-page copy operation.
• Starts copying.
• Queues a copy job if pressed while the machine is warming
up. (p. 2-24)
• The indicator lights up in green to indicate that the machine
is ready to start copying, or it lights up in orange to indicate
that the machine is not ready to start copying.
• Used to specify the number of copies.
• Used to enter setting values.
• The [ ] and [#] keys do not function on this machine.
24
25
26
27
2
2-19