To Copy Onto Label Sheets - Konica Minolta bizhub 180 User Manual

4

To copy onto label sheets

As an example, the following procedure describes how to make copies onto 7-7/8
inch (200 mm) × 9-13/16 inch (250 mm) label sheets loaded into the 1st tray.
Tip
When using the 10-Key Pad to enter a custom paper size, the values are
entered in millimeters. The conversion ratio is shown below.
1 inch = 25.4 mm
1
Position the document(s) to be copied.
❍ Refer to "Loading the Document" on page 3-9.
2
Adjust the paper guides in the 1st tray,
and load the label sheets.
❍
Load label sheets so that the
surface to be printed on faces
upward, as shown in the
illustration.
3
Press the [Utility] key twice.
The "PAPER SOURCE SETUP"
menu appears.
4-8
4.3 Copying Onto Various Types of Media
bizhub 180