Auto Panel Reset; Energy Save Mode; Auto Shut Off - Konica Minolta bizhub 180 User Manual

2.7 Power Supply

Auto Panel Reset

With the auto panel reset operation, the Copy mode screen appears after copying
or after a specified length of time has passed after the last operation is finished.
(Manufacturer's default setting: 1 minute)
Tip
The length of time until the auto panel reset operation is performed can be set
to 30 seconds or a setting between 1 and 5 minutes.
In addition, the Auto Panel Reset function can be disabled.
For details, refer to "To set the "AUTO PANEL RESET" function" on page 7-7.

Energy Save Mode

With the Energy Save mode, the machine automatically enters a standby mode
(Energy Save mode), instead of turning off.
When the machine is in Energy Save mode, the indicator on the [Start] key remains
lit in green, but the display goes off.
Note
If the Auto Shut Off function is activated during Energy Save mode, the machine
turns off.
Conditions for entering Energy Save mode
G The [Energy Save] key is pressed.
G The specified length of time after the last operation has elapsed.
(Manufacturer's default setting: 15 minutes)
Tip
The length of time until the machine enters Energy Save mode can be set
between 1 and 240 minutes. (Refer to "To set the "ENERGY SAVE MODE"
(preheat mode) function" on page 7-8.)

Auto Shut Off

With the Auto Shut Off function, the machine automatically turns off if no operation
is performed for a specified length of time, in order to conserve energy.
(Manufacturer's default setting: OFF)
bizhub 180
2
2-23