Copying Onto Manually Fed Paper; To Copy Using The Manual Bypass - Konica Minolta bizhub 180 User Manual

5

Copying Onto Manually Fed Paper

To copy using the Manual bypass

1
Load the document to be copied.
❍ Refer to "Loading the Document" on page 3-9.
2
Adjust the paper guides to fit the size
of the paper.
3
Insert one sheet of paper with the front
side facing down, lightly sliding the
paper as much as possible into the
feed slot.
The manual bypass mark (
appears in the bottom line of the
screen.
? Is a card or a postcard loaded?
➜ Make sure that it is not curled
(rolled).
4
Press the [No/C] key.
The "PAPER SOURCE SETUP" menu appears.
5
Use the and
the type of paper loaded.
❍
Select from the following four
paper type settings.
"PLAIN"
"OHP"
"CARD"
"ENVELOPE"
6
Press the [Yes] key.
The "PAPER SIZE" menu appears.
5-16
5.4 Making Copies on Manually Fed Paper
)
keys to select
bizhub 180