Interrupting Copy Jobs; To Interrupt A Copy Job - Konica Minolta bizhub 180 User Manual

5
5.9

Interrupting Copy Jobs

Long continuous copy operations can quickly be paused by pressing the [Interrupt]
key in order to copy a different document.
Note
Some functions cannot be interrupted. In addition, some functions are not
available while a copy job is interrupted. For details, refer to "Function
Combination Table" on page 10-9.
If the document is placed on the Original glass and 2in1 or 4in1 copies are being
produced, the copy job cannot be interrupted.

To interrupt a copy job

1
Press the [Interrupt] key. The Interrupt
indicator lights up, and the current
copy operation is paused.
❍
When the [Interrupt] key is
pressed, all functions are reset to
their defaults.
2
Remove the current document, and then load the other document that you wish
to copy.
3
If necessary, specify any other copy settings.
❍ Paper (p. 5-22)
❍ Zoom (p. 5-30)
❍
Copy density (p. 5-36)
❍ Advanced Copy Operations (p. 6-1)
4
Using the 10-Key Pad, enter the desired number of copies, and then press the
[Start] key to copy the other document.
5-38
5.9 Interrupting Copy Jobs
bizhub 180