Konica Minolta bizhub 180 User Manual page 231

8
Message
MEMORY FULL
(Flashing alternately)
PRESS ANY KEY
∗ ∗
PC PRINT
MEMORY FULL
SET PLUG-IN COUNTER
UPPER TRAY FULL
(Flashing alternately)
REMOVE PAPER
TRAY MOVEMENT
ERROR
(Flashing alternately)
PRESS ANY KEY
CALL SERVICE(M1)
CALL SERVICE(M2)
MACHINE TROUBLE
(Flashing alternately)
(C####)
8-20
8.4 Main Error Messages and Their Remedies
Cause
The size of the data for the
scanned image has exceeded the
capacity of the memory.
The image data received from the
computer has exceeded the
capacity of the memory.
A counter key is not inserted.
If the optional Job separator is
installed and the paper in the
Upper copy tray has reached the
maximum capacity, printing
cannot continue.
The optional Job separator is
installed and the paper in either
the Upper copy tray or the Lower
copy tray has reached the
maximum capacity when the
machine is turned on, when
copying begins, or when starting to
print.
A maintenance is due.
The Imaging unit should be
replaced.
Some problem occurred in the
machine.
Remedy
Press any key, or turn the machine
off, then on again. (The scanned
data should be cleared from the
memory.)
Press any key, or turn the machine
off, then on again. (The received
image data should be cleared from
the memory.)
Insert the counter key.
Remove all paper from the Upper
copy tray of the Job separator.
Remove the paper from the Upper
copy tray or the Lower copy tray of
the Job separator, and then press
any key.
Contact your service representative.
Contact your service representative.
Turn the machine off, then on again.
If the error is still displayed, contact
your service representative.
bizhub 180