7.3 Setting Up the Paper Sources ("PAPER SOURCE SETUP" Menu)
To set the "PAPER TYPE" function
1
Select the "PAPER SOURCE SETUP"
menu.
❍
Refer to "To select the "PAPER
SOURCE SETUP" menu" on
page 7-17.
2
Press the [3] key from the 10-Key Pad
to select "PAPER TYPE".
3
Using the
and
paper tray, and then press the [Yes]
key.
4
Using the
and
either "PLAIN", "RECYCLE" or
"SPECIAL", "1-SIDE" and then press
the [Yes] key.
The "PAPER SOURCE SETUP"
menu appears again.
Note
"1-SIDE" is displayed only when the machine is equipped with the Duplex unit.
bizhub 180
keys, select a
keys, select
7
7-21